WV-Q160S

Preface

Precautions

 • Use only the specified camera. Failure to observe this may cause a fall of an inappropriate camera resulting in injury or accidents. Refer to the catalog or the installation guide of the camera for supported cameras

 • Avoid installing this bracket in the locations where salt damage occurs or corrosive gas is produced. Otherwise, the mounting portions will deteriorate and accidents such as a fall of the camera may occur.

• Refer installation work to the dealer. Installation work requires technique and experience. Failure to observe this may cause fire, electric shock, injury, or damage to the product. Be sure to consult the dealer.

• Do not install this product in locations subject to vibration. Loosening of mounting screws or bolts may cause'a fall of the product resulting in injury or accidents.

• Install this product in a location high enough to avoid people and objects from bumping the product. Failure to observe this may cause injury.

• The measures of protection against a fall of the camera shall be taken. Failure to observe this may cause a drop resulting in injury. Be sure to install this bracket-specific safety wire.

• Periodic inspections shall be conducted. Rust on the metal parts or screws may cause a fall of the product resulting in injury. Consult the dealer for the inspections.

Precaution for installation

 This product is designed to be used indoors. This product is not operable outdoors. In order to prevent injury, the product must be securely mounted to a ceiling according to Installation Guide. • Make sure that the installation area is strong enough to hold the total weight of the camera assembly (approx. 1.4 kg {3.1 lbs.}) before installation.

 • The screws that secure the ceiling mount bracket (provided with the camera) in the ceiling are not supplied. Prepare them according to the material and strength of the area where the product is to be installed. In this case, wood screws and nails should not be used.

• Do not place this product in the following places.

• Locations where a chemical agent is used such as a swimming pool

• Locations subject to moisture or oil smoke such as a kitchen

 • Locations that have a specific environment that is subject to an inflammable atmosphere or solvents

• Locations where a radiation, an X-ray, a strong radio wave or a strong magnetic field is generated

• Locations near coasts directly subjected to sea breezes, or locations subject to corrosive gases such as from hot springs, volcanic regions, etc.

 • Locations where the temperature is not within –10 °C - +50 °C {14 °F - 122 °F}.

• Locations subject to vibrations, such as on vehicles, marine vessels, or above product lines (This product is not designed for on-vehicle use.)

• Locations where it may get wet from rain or water splash (including under the eaves, etc.)

 • Locations subject to moisture or dust

• Locations subject to condensation as the result of severe changes in temperature (In case of installing the product in such locations, the front cover may become foggy or condensation may be caused on the cover.)

 • The screws and bolts must be tightened with an appropriate tightening torque according to the material and strength of the installation area. After tightening the screws or bolts, perform visual check to ensure tightening is enough and there is no backlash.

• The pull-out strength of the installation area shall be 196 N {44 lbf} or more per 1 screw.