Preface
This ceiling mount bracket is exclusively designed to mount the network camera on a ceiling. Refer to the catalog or the installation guide of the camera for supported cameras. This bracket can be used for an area with weak pull-out strength such as plasterboard in a double ceiling. This bracket is an embedded type to reduce the exposed portion of the camera body.
• WV-Q159C: Clear dome cover
• WV-Q159S: Smoked dome cover (approx. 50 % of transmittance)
Precautions
• Do not hang down from this product or use this product as a pedestal. Failure to observe this may cause a drop resulting in accidents.
• Use only the specified camera. Failure to observe this may cause a fall of an inappropriate camera resulting in injury or accidents. Refer to the catalog or the installation guide of the camera for supported cameras
• Avoid installing this bracket in the locations where salt damage occurs or corrosive gas is produced. Otherwise, the mounting portions will deteriorate and accidents such as a fall of the camera may occur.
• Refer installation work to the dealer. Installation work requires technique and experience. Failure to observe this may cause fire, electric shock, injury, or damage to the product. Be sure to consult the dealer.
• Do not install this product in locations subject to vibration. Loosening of mounting screws or bolts may cause a fall of the product resulting in injury or accidents.
• Install this product in a location high enough to avoid people and objects from bumping the product. Failure to observe this may cause injury.
• The measures of protection against a fall of the camera shall be taken. Failure to observe this may cause a drop resulting in injury. Be sure to install this bracket-specific safety wire.
• The screws and bolts must be tightened to the specified torque. Failure to observe this may cause a drop resulting in injury or accidents.