Interface |
4 10/100M POE Ports (Data/Power) 2 10/100M RJ45 Ports (Data) |
Mode |
Normal Mode Extend+Watch Dog Mode |
LED |
PWR: Lighting - The device is powered on normally AI: Lighting - The intelligent mode is enabled Port: Lighting - Port link is normal Blinking - Data in transit |
Switching Capacity |
1.2G |
MAC Address Table Size |
2K |
Jumbo Frame |
2048 byte |
Power Input POE Standards |
Single port maximum power 30W Whole switch maximum power 60W Supporting over-current, over-voltage and short-circuit protection Supporting Soft Start of High Power PD Support sequential boot-up Power Supply Pin:12+/36- AC 100~240V 50-60HZ |
Cabling type
|
100Base-TX: Cat 5e or better UTP/STP(≤100m) 10Base-TX: Cat 5e or better UTP/STP(≤250m) |
Basic function |
Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol Supports POE IEEE 802. 3af/at compliant Powered Device (PD) Store-and-forward switching scheme Support IEEE802.3X full duplex and Backpressure half duplex MAC address auto-learning & auto-aging |
Data Transfer Rate |
10Mbps(Half-duplex and Full-duplex) 100Mbps(Half-duplex and Full-duplex) |
Store & Forwarding |
Yes |
Standards
|
IEEE 802.3 10BASE-T Ethernet IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af/at, Power over Ethernet IEEE 802.3x Flow Control |
Environment |
Operation Temperature:0℃~40℃ Storage Temperature:-40℃~70℃ Operation Humidity:10%~90% RH Non-condensing Storage Humidity:5%~90% RH Non-condensing |
Dimensions |
125*115*34mm(L * W * H ) |